How to use the Shift Scheduler
The Shift Scheduler provides timed on/off control. Start with one switchable device; use a Remote when you want a linked group to follow the schedule. Read the tool’s current shop instructions and test a full on/off cycle before connecting a production line.
Find and buy it
Check the upgrade terminal’s tool list for Shift Scheduler and read its description before buying. If it is absent, continue normal production and recheck the list as tools unlock. The available sources do not establish an exact unlock threshold or a universal purchase price; use the amount and requirements shown in your save.
Set up a small timing test
- Choose one device whose own switch already works and clear loose products from the test area.
- Place the Shift Scheduler and follow its displayed connection and timing instructions. Set a short, easy-to-observe on interval and off interval using the controls shown by your installed version.
- For a group, first link the devices to a Remote and verify that the Remote switches them correctly. Then attach that Remote to the scheduler as described in the community setup.
- Keep the scheduler powered and watch a complete on/off cycle. Confirm that it resumes rather than merely stopping once.
- Add one device at a time. Adjust timing only after the physical delivery path works.
The August community thread also says the scheduler is not limited to Remote control. It does not provide a complete compatibility list or enough detail to promise identical settings on every device.
Adjusting Every and For
An August 22 player reply describes placing the scheduler on the ground, looking at it, using the mouse wheel to change the highlighted time, and right-clicking to select the other time field. The thread uses the labels Every and For. This is a pre-v1.0.6 control example, not a fresh v1.0.8 test; check your current prompts and bindings. Its 1.0s / 0.5s example is not a universal timing requirement.
Why does the scheduler turn itself off?
An August 23 community report describes a control loop: the scheduled Remote also controls the scheduler, so its off command stops the scheduler that should start the next cycle. The author separates the scheduler’s own power control from the Remote attached to the timed devices, using two Remotes.
Historical workaround, not a confirmed current bug
That report predates v1.0.6, whose August 26 patch notes fix Shift Scheduler inconsistencies without detailing every case. The two-Remote setup has not been retested here on v1.0.8 and is not a mandatory purchase rule. If you see the same symptom, remove the scheduler from the timed Remote group, keep its power independent, and test again on a copy of a backed-up save.
Shift Scheduler or Intern Substitute?
Use timed switching for devices with an on/off control. A manual workbench that needs a held interaction is a different job: the Intern Substitute is the tool to investigate for that task. The August discussion explicitly distinguishes the manual Duck station from the scheduler setup; it does not demonstrate that a Remote or scheduler can hold the station’s button.
When nothing happens
- Test the device’s physical switch, then the Remote, then the scheduler in that order.
- Confirm the scheduler remains on during the intended off interval.
- Read the current bindings and shop instructions rather than copying an old key or timer value.
- If the symptom persists, record the installed version, intervals, linked devices, and what each switch does. An old report alone does not prove the same defect remains.
For linking controls, see the Remote guide. For a line that clogs even with correct switching, use automation troubleshooting.
Sources and limits
- HAiSEnSHIN’s August 23 scheduler discussion and replies: Remote connection, historical self-shutdown loop, and the distinction from a manual station.
- August 22 timing-controls discussion: historical Every and For field controls.
- Players’ Cauldron and Intern Substitute discussion: a separate community method for workbench activation.
- Official developer patch notes: v1.0.6 scheduler fix; latest announced patch checked for this review: v1.0.8.
This is a source-based setup and diagnostic guide, not a new in-game compatibility test. Exact unlock requirements, timer semantics and current device coverage remain unverified.